这是描述信息
NEWS CENTER
Your location:
Home
>
>
>
The second announcement of Guixi Sanyuan Metal Co., Ltd.'s annual production of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

The second announcement of Guixi Sanyuan Metal Co., Ltd.'s annual production of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2011-05-25
  • Views:0

(Summary description)The second public announcement of the project of Guixi Sanyuan Metal Co., Ltd. with an annual output of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

The second announcement of Guixi Sanyuan Metal Co., Ltd.'s annual production of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

(Summary description)The second public announcement of the project of Guixi Sanyuan Metal Co., Ltd. with an annual output of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2011-05-25
  • Views:0
Information

  The second public announcement of the project of Guixi Sanyuan Metal Co., Ltd. with an annual output of 2,000 tons of refined bismuth and 1,000 tons of tin ingots

   One. Situation of the construction unit

   Unit name: Guixi Sanyuan Smelting Chemical Co., Ltd.

   Unit location: West of Baili Avenue, Guixi City

   Contact name: Director Huang

  Contact phone number: 13870176509

  Postal code:

   2. Situation of Environmental Impact Assessment Units

  Shangrao Environmental Science Research Institute

  Contact information: phone or letter

   Mailing address: No. 16 Yanhe East Road, Shangrao City

  Contact: Mao Gong

  3. Approval unit

   Jiangxi Provincial Department of Environmental Protection Tel: 0791—8591189

  4. Project construction status

   (1) Construction project name: Guixi Sanyuan Science & Trade Co., Ltd. Warehousing Project.

   (2) Construction unit: Guixi Sanyuan Smelting Chemical Co., Ltd.

  (3) Construction site: In Guixi Industrial Park, the geographic coordinates of the center of the site are 117°8'39.9", north latitude 28°16'17.70". Guixi City is located in the northeast of Jiangxi Province, where the Zhejiang-Jiangxi Railway, the Yingxia Railway, and the Anhui-Jiangxi Railway intersect and run through the entire territory. The railway within the territory is 133km long. The highways 320 and 206 national roads pass through the urban area, while the Liwen section of the Shanghai-Russia Expressway passes through the north of Guixi City (about 5.5km). See attached picture 1 for geographical location and traffic conditions.

   (4) Construction nature: new construction.

See Table 1 for the construction content of the    project.

   One. Situation of the construction unit

   Unit name: Guixi Sanyuan Smelting Chemical Co., Ltd.

   Unit location: West of Baili Avenue, Guixi City

   Contact name: Director Huang

  Contact phone number: 13870176509

  Postal code:

   2. Situation of Environmental Impact Assessment Units

  Shangrao Environmental Science Research Institute

  Contact information: phone or letter

   Mailing address: No. 16 Yanhe East Road, Shangrao City

  Contact: Mao Gong

  3. Approval unit

   Jiangxi Provincial Department of Environmental Protection Tel: 0791—8591189

  4. Project construction status

   (1) Construction project name: Guixi Sanyuan Science & Trade Co., Ltd. Warehousing Project.

   (2) Construction unit: Guixi Sanyuan Smelting Chemical Co., Ltd.

  (3) Construction site: In Guixi Industrial Park, the geographic coordinates of the center of the site are 117°8'39.9", north latitude 28°16'17.70". Guixi City is located in the northeast of Jiangxi Province, where the Zhejiang-Jiangxi Railway, the Yingxia Railway, and the Anhui-Jiangxi Railway intersect and run through the entire territory. The railway within the territory is 133km long. The highways 320 and 206 national roads pass through the urban area, while the Liwen section of the Shanghai-Russia Expressway passes through the north of Guixi City (about 5.5km). See attached picture 1 for geographical location and traffic conditions.

   (4) Construction nature: new construction.

See Table 1 for the construction content of the    project.

  Table 1 List of main construction contents

 

Serial number

Facilities name

Construction content

Description

Main project

General warehouse

8 buildings, each covers an area3024m2, high7.5m, volume15000m3. All are light steel structure, color steel tile roof.

The annual turnover is 24,000 tons. Set up soundproof doors to prevent rain and moisture on the wall.

Dangerous goods warehouse

2 buildings, each covers an area1344m2, high7.5m, volume6700m3. All are light steel structure, color steel tile roof.

The annual turnover is 22,000 tons. Set up soundproof doors to prevent rain and moisture on the wall.

Utilities

Power supply

Powered by the industrial park. There is a power distribution room in the factory area, with 2 resin-insulated dry-type SCB9-1250/10 transformers, 2 MNSG drawer type power distribution cabinets, and 2 capacitor automatic compensation cabinets.

The annual power consumption is 8000kWh.

Water supply

Introduce a DN150 water pipe from the industrial park to supply domestic and fire-fighting water. Low-pressure water supply system is used indoors, and fire hydrants are installed outdoors.

The new water consumption is 0.135 million m3/a.

Office building and product exhibition hall

2 buildings, the exhibition hall covers an area540m2; Office building area907.5 m2.

3 floors, no basement, meeting the needs of administrative office and product display.

Environmental protection engineering

Exhaust gas treatment facilities

Natural ventilation.

 

Wastewater treatment facilities

Septic tank.

External discharge to the park sewage treatment plant

Solid waste disposal

Set up a trash can.

After collection, hand over to the sanitation department for disposal

Greening

Plant roads and surrounding buildings in the factory area, with an area of ​​13320m2.

Greening factor 20%

 

  5. Main production process

  For details, please refer to the process flow chart in Figure 1.

   Figure 1 Schematic flow chart of the operation of Sanyuan Technology and Trade Company

  6. Summary of pollutant emissions

   (1) Pollutant discharge summary

  The main pollution sources and their main pollutant emissions are shown in Table 2.

  Table 2 The whole plant“three wastes” discharge summary table

 

Pollutant name

Single  bit

Amount produced

Emissions

Reduction

Wastewater

Total wastewater

m3/a

0.072

0

0

CODcr

t/a

0.18

0

0.18

BOD5

t/a

0.14

0

0.14

SS

t/a

0.11

0

0.11

Solid waste

Household garbage

t/a

18

0

18

 

   Seven. Evaluation conclusion

  1) We must strictly implement environmental protection laws and regulations and the "three simultaneous" system, strengthen the management and treatment of production waste water, waste gas, noise, and solid waste, and all discharge indicators after treatment should meet national and local standards. Reduce the adverse impact on the surrounding environment.

  2) During the trial production of the project, timely report to the local environmental protection authority for the acceptance of the pollution control facilities. After the acceptance is passed, the pollution control facilities can be officially put into operation, and the pollution control facilities and the main project can be operated at the same time.

  3) After the project is put into production, environmental management should be strengthened to ensure the normal operation of environmental protection facilities to prevent all pollution accidents, especially to prevent accidental discharge. If abnormal conditions occur, immediately stop production for maintenance to avoid pollution. Due to the relatively complex composition of the raw materials in this project, changes in the composition of the raw materials may cause some pollutants to be discharged beyond the standard; if accidental discharge, the pollution will be more serious, so it needs to be managed in strict accordance with the process requirements.

  4) Strengthen risk prevention measures to minimize the adverse impact of accidents on the environment.

   In summary, the construction of the project conforms to the country’s industrial policy and is of positive significance for the comprehensive utilization of resources and the development of the local economy. The project site selection is appropriate, the construction conditions are relatively good, and the environmental protection measures for pollution prevention and control are complete and practical. According to the engineering analysis, the environmental impact of pollutant emissions is within the acceptable capacity of the local environment. The project construction has obvious social, economic and environmental benefits, conforms to the local development plan, and conforms to the environmental protection policy. Therefore, under the premise of implementing the various environmental protection measures and suggestions put forward in this evaluation, and analyzing from the perspective of environmental protection, the project construction is feasible. In the process of factory construction and production operation, the construction unit should ensure the investment amount and rational use of environmental protection funds, so that the "three simultaneous" work can be implemented.

  8. How the public can consult the environmental impact report (simplified version)

  If any unit or individual needs to inquire about the environmental impact report (simplified version) of this project, they can directly consult the construction unit or evaluation unit according to the above contact information; or fax the E-Mail to the evaluation unit, and the evaluation unit confirms that the requester is The public interested in this project will send a short copy of the report to the requester via E-Mail. The deadline for access to the abbreviated report is May 16, 2011. If you have comments or suggestions on environmental protection for this project, you can submit your comments to the construction unit or environmental assessment unit at the same time within 10 days from the date of this announcement, or you can reflect the written comments to the environmental protection management department for the construction unit and environmental impact assessment Reference for decision-making by units and government authorities.

Announcement issuance unit: Guixi Sanyuan Smelting Chemical Co., Ltd.

Announcement time: May 16, 2011

 

Keyword:

Scan the QR code to read on your phone

Relevant information

Dasanyuan Copper Resources Zimbabwe Co., Ltd.
Dasanyuan Copper Resources Zimbabwe Co., Ltd.
Time of issue : 2022-02-24 13:24:05
ProgressreportforGrandSanyuan'sAlaskaMineOperations–January2022. CopperSmeltingPhase AlaskaCopperSmeltingProjectresuscitationprojectavisionof,andpartnershipbetweenGrandSanyuanChina,RNHofDefenceandZMDC
See more information
ProgressreportforGrandSanyuan'sAlaskaMineOperations–January2022. CopperSmeltingPhase AlaskaCopperSmeltingProjectresuscitationprojectavisionof,andpartnershipbetweenGrandSanyuanChina,RNHofDefenceandZMDC
2021 China Bismuth Science and Industry Symposium
2021 China Bismuth Science and Industry Symposium
Time of issue : 2021-09-26 10:47:02
       From September 24th to 25th, 2021, the China Bismuth Science and Industry Seminar was held in Vienna Hotel Guixi, Yingtan City, Jiangxi Province. Hosted by Guixi Dasanyuan Industrial (Group) Co., Ltd. specially invited and co-organized, the participants include government representatives, entrepreneurs, industry experts and authoritative media. In-depth analysis and discussion are carried out from the current situation of bismuth industry, industry market prospect and bismuth application.      
See more information
       From September 24th to 25th, 2021, the China Bismuth Science and Industry Seminar was held in Vienna Hotel Guixi, Yingtan City, Jiangxi Province. Hosted by Guixi Dasanyuan Industrial (Group) Co., Ltd. specially invited and co-organized, the participants include government representatives, entrepreneurs, industry experts and authoritative media. In-depth analysis and discussion are carried out from the current situation of bismuth industry, industry market prospect and bismuth application.      
Guixi Sanyuan Smelting Chemical Co., Ltd.
Guixi Sanyuan Smelting Chemical Co., Ltd.
Time of issue : 2022-01-04 16:58:00
Guixi Sanyuan Smelting and Chemical Co., Ltd. was established in November 2000. It is a medium-sized modern private enterprise and passed the ISO9001 quality certification system in November 2002. The company is located on the west side of Baili Avenue, Guixi City, covering an area of It covers an area of ​​53,000 square meters and has a registered capital of 55 million yuan. The company's main products are: refined bismuth, matte, bismuth oxide, electric lead, refined tellurium. The annual sales are 1 billion yuan, and the profits and taxes are 50 million yuan. The products are exported to Belgium, France, Japan, the United Kingdom and other developed countries. Sanyuan Company closely focuses on the development idea of ​​"high, deep, and refined", adheres to the "market-oriented, economic construction-centered" concept, adheres to the concept of "science and technology development, integrity management", and continuously deepens reforms, pioneers and innovates , Based on the market, strong internal quality, external image, make the development of the enterprise from small to large, from weak to strong, and achieved a double harvest of economic and social benefits. Over the years, the company has been awarded the "Provincial First-Class Integrity Enterprise" and "Jiangxi Province Contract-honoring and Promise-keeping 3A Enterprise" for many times, and won the title of "Jiangxi Province Excellent Private Technology Enterprise" and the national and provincial "High-tech Enterprise".
See more information
Guixi Sanyuan Smelting and Chemical Co., Ltd. was established in November 2000. It is a medium-sized modern private enterprise and passed the ISO9001 quality certification system in November 2002. The company is located on the west side of Baili Avenue, Guixi City, covering an area of It covers an area of ​​53,000 square meters and has a registered capital of 55 million yuan. The company's main products are: refined bismuth, matte, bismuth oxide, electric lead, refined tellurium. The annual sales are 1 billion yuan, and the profits and taxes are 50 million yuan. The products are exported to Belgium, France, Japan, the United Kingdom and other developed countries. Sanyuan Company closely focuses on the development idea of ​​"high, deep, and refined", adheres to the "market-oriented, economic construction-centered" concept, adheres to the concept of "science and technology development, integrity management", and continuously deepens reforms, pioneers and innovates , Based on the market, strong internal quality, external image, make the development of the enterprise from small to large, from weak to strong, and achieved a double harvest of economic and social benefits. Over the years, the company has been awarded the "Provincial First-Class Integrity Enterprise" and "Jiangxi Province Contract-honoring and Promise-keeping 3A Enterprise" for many times, and won the title of "Jiangxi Province Excellent Private Technology Enterprise" and the national and provincial "High-tech Enterprise".

OFFICIAL ACCOUNTS

Welcome to follow our official public account

 Guixi Da san yuan Industry (Group) Co.,Ltd.

ONLINE MESSAGE

留言应用名称:
客户留言
描述:
验证码

All rights reserved © 2021 Guixi Da san yuan Industry (Group) Co.,Ltd.     Website: www.300.cn  赣ICP备2021009788号-1